Buying a house is an enormous investment. Home inspections ensure buyers know exactly what they’re pouring their money into. After all, no one wants to spend their life savings on a house that doesn’t cut the mustard!
Does your house meet the mark?
Use these 5 home inspection tips to make sure your house is inspection-ready.
1. Don’t Disguise Problem Areas
When selling your house, you want it to look its best. It’s tempting to slap on some paint and strategically place new carpets, but this does you more harm than good.
Some sellers paint their walls to cover cracks and mold and use new carpets to hide floor damage caused by pets, mold, or sewage backups. Inspectors know all the tricks – and they’ll be on the lookout for fresh paint and shiny carpets. By trying to hide the issue, you call more attention to it.
If you want to pass your home inspection, focus your energy (and money) on fixing problems rather than disguising them.
2. Assess the Integrity of the Shell
All Jersey Home Inspection starts each evaluation by looking at the home’s structural integrity. The biggest red flags during an inspection have to do with the shell of your home. This includes your foundation, walls, windows, flooring, and roof.
Inspectors will look for:
- cracks in the foundation, interior walls, or ceiling
- broken roof tiles, windows
- warped, sagging, or uneven floors
- leaks in the roof
- leaning walls or chimney
- windows and doors that don’t close or seal
- water damage on the roof, in the attic, on floors
- sagging roof
These signs all point to a shell that was built or maintained poorly. If you have the capacity to repair these issues, you won’t have price cuts to deal with.
3. Invest in HVAC Maintenance
Inspectors are guaranteed to notice problems with your HVAC system. If you haven’t kept up with routine HVAC system maintenance, schedule an inspection with your local technician and hear what they have to say.
By cleaning the pipes, changing out the filters, and replacing faulty parts within the system, your home will be ready to pass its home inspection with flying colors.
Take note of when the maintenance is done – your inspector will want to know.
4. Get Rid of Mold
A home safety inspection also includes looking for signs of mold. Mold is a subtle but dangerous issue that points to a bigger problem with your water system.
Look for standing water, musty smells, and physical mold throughout your home. Call in a professional to remove the mold as it can pose a health hazard to you, your family, and your pets.
5. Have a Plumbing Inspection
Some signs of plumbing issues are more obvious than others, such as a slow-draining sink or overflowing toilet. Look for these signs before your home inspection:
- visible leaks from visible pipes
- signs of leaks (stains, mildew)
- sounds of running or dripping water
- low water pressure
- slow-draining sinks, basins, baths, or showers
- an increase in your water bill
Schedule a plumbing inspection to make sure everything is running smoothly and efficiently. Your plumber will let you know of serious problems and fix them up before your home inspection.
Home Inspection Tips to Help You
Home inspections are an important part of the house selling process. Without a home inspection pass, your deal may fall through entirely.
Hopefully, these home inspection tips will help you prepare for your home inspection.
Was this post helpful? Check out our blog for more tips, advice, and everything you need to know.